kaoccna 的优势

hh0-200 试题的质量和价值
mcsepass 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
100% 保证您通过 hh0-200 的考试
如果你使用 mcsepass 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
试用后再购买
mcsepass 提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性。
kaoccna认证考试题库网专业提供 Hitachi hh0-200 最新题库下载，完全覆盖 mcsepass 考试原题。

部分考题展示

　
　
Exam : Hitachi HH0-200
Title : Certified Modular Integration Specialist Exam


1. Ten LUNs must be recognized by the QLogic HBA on Microsoft Windows 2000 Server which is connected to a Hitachi Thunder 9500V?Series subsystem. What is the system parameter that needs to be set up?
A. in the modify Host Group option, select CCHS mode in Standard mode
B. in the modify Host Group option, select CCHS mode in Host connection mode
C. in the modify Host Group option, select HISUP2 mode in Host connection mode
D. in the modify Host Group option, select HISUP mode in Host connection mode 2
Answer: D

2. You are performing a Microprogram install for a customer on their Hitachi Thunder 9570V?Series subsystem. You receive message code RBA000 on the Web Access information messages. What does this message indicate?
A. Installation failed.
B. Installation failed in a part of the drive.
C. Downgrade check result was "Not Good."
D. There was another system when installation was started.
Answer: C

3. You are connected to a Hitachi Thunder 9500V?Series subsystem using Hitachi?Resource Manager GUI. You have created LUNs for 12D+1P RAID group, and now you want to set up one spare disk. Given the following steps:
A.select Settings-> Logical Settings
B. select Settings-> Configuration Settings
C. select the Logical Settings tab
D.select Settings-> Logical Unit-> Set Spare Drive
E.select the disk that you want to set up as spare
F.select the Spare Drive tab
A. B, F, E
B. B, F, G
C. D, C, E
D. F, C, G
Answer: B

4. Which statement is true about cache slots on the Hitachi Thunder 9500V?Series subsystem?
A. Each controller has two cache slots and each slot can hold 1GB DIMMS for a maximum of 2GB per controller.
B. Each controller has two cache slots and each slot can hold 512MB or 1GB DIMMS for a maximum of 1GB or 2GB per controller.
C. Each controller has four cache slots and each slot can hold 512MB or 1GB DIMMS for a maximum of 2 GB or 4GB per controller.
D. Each controller has four cache slots and each slot can hold 256MB or 512MB DIMMS for a maximum of 1 GB or 2 GB per controller.
Answer: B

5. You are using the Hitachi?Resource Manager GUI for the first time. You want to change to a different mode from default mode. What is the first thing you should do, before changing to a different mode?
A. go to Add-> Password and add the password
B. go to Add-> Change Mode and select the mode
C. go to Settings-> Password and register the password
D. go to Settings-> Change Properties and set the mode option to other modes
Answer: C

6. A customer has Sun Netra Servers mounted on a Hitachi Data Systems?19 inch rack. You need to mount a RK and a RKA on the same rack. What is the amps/PS rating you need to use for both the RK and RKA together in order to ensure that the PDU is not overloaded when two power supplies are used on both the RK and the RKA and the source is 100V?
A. 3.20
B. 5.10
C. 6.30
D. 10.20
Answer: C

7. Which component on the first RKA is used to connect to the RK in a Hitachi Thunder 9570V?Series subsystem?
A. PDB
B. ENC unit
C. Controller unit
D. AC Power Unit
Answer: B

8. Which three operating systems can be used to install and run HDLM? (Choose three.)
A. AIX
B. OS/2
C. HP-UX
D. VxWorks
E. Microsoft Windows 2000
Answer: ACE

9. What is the maximum distance between a host and a Hitachi Thunder 9500V?Series subsystem, when using short-wave Fibre Channel cable operating at data transfer speed of 200MB/s?
A. 100 meters
B. 200 meters
C. 300 meters
D. 400 meters
Answer: C

10. What is the operational humidity requirement at a site when installing a Hitachi Thunder 9500V?Series subsystem?
A. 5% to 90%
B. 8% to 80%
C. 10% to 75%
D. 10% to 90%
Answer: B

11. What is the vibration tolerance of a Hitachi Thunder 9570?subsystem in operation, if installed near large generators located on the floor above or below the subsystem?
A. 2.5 m/s2 or less
B. 3.0 m/s2 or less
C. 3.5 m/s2 or less
D. 4.0 m/s2 or less
Answer: A

12. A customer has purchased a floor model of a Hitachi Thunder 9570V?Series subsystem set up as RK + RKA + H2H Deskside Kit. Which two connections between the RK and the RKA are valid? (Choose two.)
A. HSSDC#0 on Controller#0 of RK is connected to HSSDC#0 on ENC Unit#0 of RKA and HSSDC#1 on Controller#0 of RK is connected to HSSDC#1 on ENC Unit#0 of RKA.
B. HSSDC#0 on Controller#0 of RK is connected to HSSDC#1 on ENC Unit#0 of RKA and HSSDC#1 on Controller#0 of RK is connected to HSSDC#0 on ENC Unit#0 of RKA.
C. HSSDC#0 on Controller#1 of RK is connected to HSSDC#0 on ENC Unit#1 of RKA and HSSDC#1 on Controller#1 of RK is connected to HSSDC#1 on ENC Unit#1 of RKA.
D. HSSDC#0 on Controller#1 of RK is connected to HSSDC#1 on ENC Unit#1 of RKA and HSSDC#1 on Controller#1 of RK is connected to HSSDC#0 on ENC Unit#1 of RKA.
Answer: AC

13. What do you use to capture Simple or CTL Alarm trace information?
A. HiCommand
B. Web Access
C. Hitachi?Resource Manager CLI
D. Hitachi?Resource Manager GUI
Answer: B

14. You have assembled and installed a Hitachi Thunder 9570V?subsystemRK and a RKA into a 19 inch rack. The system parameters have also been configured. The customer now needs to use port 0A in order to connect HP-UX with a LUN 0 and Solaris with a LUN 0 on the same port. Which two will enable this configuration? (Choose two.)
A. install the LUN SECURITY license
B. create two host groups on port 0A
C. install the LUN-MANAGEMENT license
D. configure port 0A to work in HP-UX mode
Answer: BC