kaoccna 的优势

70-642 试题的质量和价值
mcsepass 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
100% 保证您通过 70-642 的考试
如果你使用 mcsepass 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
试用后再购买
mcsepass 提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性。
kaoccna认证考试题库网专业提供 Microsoft 70-642 最新题库下载，完全覆盖 mcsepass 考试原题。

部分考题展示

　
　
Exam : Microsoft 70-642
Title : TS: Windows Server 2008 Network Infrastructure, Configuring Certification


1. Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and the branch office.
How should you configure each portable computer?
A.Use a static IPv4 address in the range used at the branch office.
B.Use an alternate configuration that contains a static IP address in the range used at the main office.
C.Use the address that was assigned by the DHCP server as a static IP address.
D.Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D

2. Your company has four DNS servers that run Windows Server 2008. Each server has a static IP address.
You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.
What should you do?
A.Create a new scope for the DNS servers.
B.Create a reservation for the DHCP server.
C.Configure the 005 Name Servers scope option.
D.Configure an exclusion that contains the IP addresses of the four DNS servers.
Answer: D

3. Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A.Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B.Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C.Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D.Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A

4. You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008. The DHCP server contains one scope.
You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP.
What should you do?
A.Create a multicast scope.
B.Assign a static IP address to Server2.
C.Create an exclusion range in the DHCP scope.
D.Create a DHCP reservation in the DHCP scope.
Answer: D

5. You configure a new file server that runs Windows Server 2008. Users access shared files on the file server.
Users report that they are unable to access the shared files.
The TCP/IP properties for the file server are configured as shown in the following exhibit.
You need to ensure that users are able to access the shared files.
How should you configure the TCP/IP properties on the file server?
A.Configure a static IP address.
B.Configure the default gateway.
C.Configure the DNS server address.
D.Add the domain to the DNS suffix on the network interface.
Answer: A

6. Your company has an Active Directory forest. The corporate network uses DHCP to configure client computer IP addresses.
The DHCP server has a DHCP client reservation for a portable computer named WKS1. You install a second DHCP server on the network.
You need to ensure that WKS1 receives the DHCP reservation from the DHCP service.
What should you do?
A.Run the ipconfig /renew command on WKS1.
B.Run the netsh add helper command on WKS1.
C.Add the DHCP reservation for WKS1 to the second DHCP server.
D.Add both DHCP servers to the RAS and IAS Servers group in the Active Directory domain.
Answer: C

7. Your company is designing its public network. The network will use an IPv4 range of 13107.40.0/22. The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A.Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B.Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C.Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D.Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A

8. Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations.
What should you do?
A.Configure dynamic NAT on the firewall.
B.Configure the firewall to allow the use of Teredo.
C.Configure a link local IPv6 address for the internal interface of the firewall.
D.Configure a global IPv6 address for the external interface of the firewall.
Answer: B

9. You have a DHCP server that runs Windows Server 2008. The DHCP server has two network connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A.From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B.From the DHCP snap-in, create a new multicast scope.
C.From the properties of the LAN1 network connection, set the metric value to 1.
D.From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A

10. Your company has recently deployed a server that runs Windows Server 2008. The server has the IP information shown below:
IP address: 192.168.46.186
Subnet mask: 255.255.255.192
Default gateway: 192.168.46.1
Users on remote subnets report that they are unable to connect to the server.
You need to ensure all users are able to connect to the server.
What should you do?
A.Change the IP address to 192.168.46.129.
B.Change the IP address to 192.168.46.200.
C.Change the subnet mask to a 24-bit mask.
D.Change the subnet mask to a 27-bit mask.
Answer: C

11. You have a DHCP server that runs Windows Server 2008.
You need to reduce the size of the DHCP database.
What should you do?
A.From the DHCP snap-in, reconcile the database.
B.From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C.From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D.From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B

12. Your company has a main office and a branch office.
Users in the branch office report that they are unable to access shared resources in the main office.
You discover that computers in the branch office have IP addresses in the range of 169.254.x.x.
You need to ensure that computers can connect to shared resources in both the main office and the branch office.
What should you do?
A.Configure a DHCP relay agent on a member server in the main office.
B.Configure a DHCP relay agent on a member server in the branch office.
C.Configure the Broadcast Address DHCP server option to include the main office s DHCP server address.
D.Configure the Resource Location Servers DHCP server option to include the main office s server IP addresses.
Answer: B

13. You have a Windows Server 2008 computer that has an IP address of 172.145.9/21.
The server is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A.Type ping 172.16.45.9:::::.
B.Type ping ::9.45.16.172.
C.Type ping followed by the Link-local address of the server.
D.Type ping followed by the Site-local address of the server.
Answer: C

14. Your company has a single Active Directory domain. The domain runs at the functional level of Windows Server 2003.
You install the DHCP service on a server named DHCP1. You attempt to start the DHCP service, but it does not start.
You need to ensure that the DHCP service starts.
What should you do?
A.Restart DHCP1.
B.Configure a scope on DHCP1.
C.Activate the scope on DHCP1.
D.Authorize DHCP1 in the Active Directory domain.
Answer: D